|
BT1B
BT1C
BT1 MANDRELS
BT3
BT3 MANDRELS
- All prices are F.O.B. Dayton, Ohio.
- Terms: n/30, with approved credit.
- Prices and Specifications are subject to change without notice.
- 15% Restocking charge for all returned goods (no returns of
special order items).
- Minimum Order is $50.
- Most major credit cards accepted.
| BT1 ROLLER GUIDED BEND TESTERS
A 1.500 inch outside diameter mandrel and the required adapter are provided
as standard with each bend tester. |
| Part
No. |
Description |
Price |
| BT1B |
Pneumatic Version |
$3095.00 |
| 21"H x 20"W x 15"D, 70 lbs. |
| BT1B-E
|
Electric Version |
3665.00 |
| 21"H x 20"W x 15"D (Bender), 14"H x
9.6"W x 9.6"D (Pump), 85 lbs. total. |
| BT1B-HO
|
| Hand-Operated Version |
2695.00 |
| 21"H x 20"W x 15"D, 64 lbs. |
| -S |
-S added to any BT1B Part No. denotes a modification to allow
for a closer roller spacing for mandrels smaller than BT1-M0.436. Add |
395.00 |
| BT1C |
Pneumatic Version |
2045.00 |
| 20"H x 11"W x 6"D (Bender), 5.7"H x 5.6"W x
14.7"D (Pump), 37 lbs. total. |
| BT1C-E |
Electric Version |
2715.00 |
| 20"H x 11"W x 6"D (Bender), 14"H x
9.6"W x 9.6"D (Pump), 52 lbs. total. |
| BT1C-HO |
Hand Operated Version |
1765.00 |
| 20"H x 11"W x 6"D (Bender), 5.6"H x
3.8"W x 13.3"D (Pump), 30 lbs. total. |
Top of Page
|
The last four
digits of the Mandrel Part Number give the mandrel outside diameter in inches. |
| Mandrel Part No. |
Price |
Mandrel Adapter Required |
Price |
| BT1-M0.250* |
$100.00
|
BT1-MA3 |
$195.00 |
| BT1-M0.260* |
100.00 |
| BT1-M0.436 |
100.00 |
| BT1-M0.500 |
125.00 |
BT1-MA1 |
155.00 |
| BT1-M0.625 |
125.00 |
| BT1-M0.750 |
125.00 |
| BT1-M0.872 |
135.00 |
BT1-MA2 |
155.00 |
| BT1-M1.000 |
135.00 |
| BT1-M1.120 |
135.00 |
| BT1-M1.250 |
135.00 |
BT1-MA0 |
Standard with
BT1B and BT1C |
| BT1-M1.500 |
Standard |
| BT1-M2.000 |
155.00 |
| BT1-M2.063 |
165.00 |
| BT1-M2.500 |
190.00 |
| BT1-M3.000 |
235.00 |
| BT1-M3.500 |
280.00 |
| BT1-M3.750 |
295.00 |
* BT1B-S required for these mandrels.
Top of Page
| BT1C ROLLER PLATES
The Model BT1C Bend Tester requires a different set
of roller plates for each different size of mandrel to be used. To order a set of roller
plates for a given mandrel size, use the prefix BT1-RP followed by the diameter of mandrel
to be used. For example, to order roller plates for a BT1-M3.500 mandrel, order roller
plates using part number BT1-RP3.500. To order a complete roller plate assembly (with
rollers, bearings and shafts), add -WR to the part number; for example, BT1-RP3.500-WR.
Also, please specify the code or standard you will be using. |
| Part No. |
Description |
Price |
| BT1-RP0.500 through BT1-RP2.500 |
Roller plates (per set of two) |
$168.00 |
| BT1-RP3.000 through BT1-RP3.500 |
Roller plates (per set of two) |
$213.00 |
| -WR |
Complete Roller Plate Assy. |
Add $195.00 |
Top of Page
BT3 WRAPAROUND GUIDED BEND TESTERS
A 1.500 inch outside diameter mandrel, a standard mandrel support
and roller are provided as standard with each unit. The hydraulic
pump motor is wired for 115 vac, 1 phase, 60 Hz input. |
| Part
No. |
Description |
Price
|
| BT3-B |
Bench Version |
$12,300 |
| 12"H x 24"W x 18"D (Bender), 9"H x
25"W x 7"D (Pump), 290 lbs. |
| BT3-P |
Pedestal Version |
$12,800 |
| 46"H x 25"W x 22"D, 335 lbs. |
Top of Page
| BT3 SERIES MANDRELS
The last four digits of the Mandrel Part Number give the mandrel outside
diameter in inches. |
| Mandrel Part No. |
Support Required
(See Below) |
Roller Required
(See Below) |
Price |
| BT3-M0.125 |
BT3-MS1 |
BT3-R1 |
$185.00 |
| BT3-M0.250 |
BT3-MS1 |
BT3-R1 |
125.00 |
| BT3-M0.375 |
BT3-MS1 |
BT3-R1 |
125.00 |
| BT3-M0.400 |
BT3-MS1 |
BT3-R1 |
125.00 |
| BT3-M0.500 |
BT3-MS1 |
BT3-R1 |
125.00 |
| BT3-M0.625 |
BT3-MS1 |
BT3-R1 |
135.00 |
| BT3-M0.750 |
BT3-MS2 |
BT3-R0 |
160.00 |
| BT3-M0.872 |
BT3-MS2 |
BT3-R0 |
165.00 |
| BT3-M1.000 |
BT3-MS2 |
BT3-R0 |
170.00 |
| BT3-M1.120 |
BT3-MS2 |
BT3-R0 |
175.00 |
| BT3-M1.250 |
BT3-MS0 |
BT3-R0 |
180.00 |
| BT3-M1.500* |
BT3-MS0* |
BT3-R0* |
185.00 |
| BT3-M2.000 |
BT3-MS0 |
BT3-R0 |
230.00 |
| BT3-M2.063 |
BT3-MS0 |
BT3-R0 |
230.00 |
| BT3-M2.500 |
BT3-MS0 |
BT3-R0 |
245.00 |
| BT3-M3.000 |
BT3-MS0 |
BT3-R0 |
265.00 |
| BT3-M3.500 |
BT3-MS0 |
BT3-R2 |
280.00 |
| BT3-M3.750 |
BT3-MS0 |
BT3-R2 |
295.00 |
| Supports |
BT3-MS0* |
|
110.00 |
| BT3-MS1 |
|
205.00 |
| BT3-MS2 |
|
205.00 |
| Rollers |
|
BT3-R0* |
165.00 |
| |
BT3-R1 |
175.00 |
| |
BT3-R2 |
130.00 |
|
* These items come with the unit as standard parts. |
Top of Page
Effective Date: 05-28-09
|
Pricing - Bend Testers