|
- All prices are F.O.B. Dayton, Ohio.
- Terms: n/30, with approved credit.
- Prices and Specifications are subject to change without notice.
- 10% Restocking charge for all returned goods (no returns of
special order items).
- Most major credit cards accepted.
BEND
SPECIMEN CUTTER
Select from the following lists. Not all items are
required for a particular application. Start at the top and work
downwards, picking only the items that apply. |
| Part
No. |
Description |
Price |
| BSC-IB |
Indexer
Base.
One indexer base is required for each saw to be used as a bend
specimen cutter. The type of saw or its T-slot dimensions must be
specified at the time of order so that the correct mounting holes can be
provided. Only certain vertical band saws are supported. The following
fixtures can be interchangeably mounted on the BSC-IB. |
$3,340.00 |
| BSC-2 |
2"
Pipe Fixture.
For cutting bend specimens from 2" nominal and Super
(2-3/4" x 5/8" wall) pipe size . Requires a set of Pipe Mandrels for each
schedule of pipe to be cut. |
2,665.00 |
| BSC-6 |
6"
Pipe Fixture.
For cutting bend specimens from 6" pipe. Requires a set of
Pipe Mandrels for each schedule of pipe to be cut. |
3,100.00 |
| BSC-3/8PLT |
3/8"
Plate Fixture.
For cutting bend specimens from samples up to 3/8" thick x 8" across the
weld. Requires a plate template for the code, type of
bend specimen, and thickness of saw blade to be used. |
2,245.00 |
| BSC-1PLT |
1"
Plate Fixture.
For cutting bend specimens from samples up to 1" thick x
8" across the weld. Requires a plate template for the code, type of
bend specimen, and thickness of saw blade to be used. |
3,195.00 |
Top of Page
| PIPE
MANDREL SETS
A
pipe template is required for each thickness of saw blade to be
used. A pipe template can be used for more than one mandrel set, but the
mandrel set and template must be for the same type and width of specimen.
|
| Part
No. |
Description |
Price |
| BSC-2XS |
2"
XS Pipe Mandrel Set.
For cutting 3/4" face and root bend specimens with the BSC-2 pipe
fixture.
|
$625.00 |
| BSC-2XXS |
2"
XXS Pipe Mandrel Set.
For cutting 3/8" side bend specimens with the BSC-2 pipe
fixture.
|
800.00 |
| BSC-2-3/4x5/8 |
2-3/4x5/8 Super
Pipe Mandrel Set.
For cutting 3/8" side bend specimens with the BSC-2 pipe
fixture.
|
925.00 |
| BSC-6STD |
6"
STD Pipe Mandrel Set.
For cutting 1-1/2" face and root bend specimens with the BSC-6 pipe
fixture.
|
1195.00 |
| BSC-6XS |
6"
XS Pipe Mandrel Set.
For cutting 3/8" side bend specimens with the BSC-6 pipe
fixture. |
1295.00 |
| BSC-6XXS |
6"
XXS Pipe Mandrel Set.
For cutting 3/8" side bend specimens with the BSC-6 pipe
fixture. |
1595.00 |
Top of Page
| PIPE
TEMPLATES
|
| Part
No. |
Description |
Price |
| BSC-3/8.042 |
3/8"
Pipe
Template. For cutting 3/8" wide side bend specimens with a pipe
fixture using an 0.042" thick saw blade. |
$105.00 |
| BSC-3/4.042 |
3/4"
Pipe
Template. For cutting 3/4" wide face and root bend specimens with a
pipe fixture using an 0.042" thick saw blade. |
105.00 |
| BSC-1-1/2.042 |
1-1/2"
Pipe
Template. For cutting 1-1/2" wide face and root bend specimens with a
pipe fixture using an 0.042" thick saw blade. |
105.00 |
Top of Page
PLATE
TEMPLATES
|
| Part
No. |
Description |
Price |
| BSC-IX.3/8.042 |
3/8"
ASME
Section IX Plate Template. For cutting (2) 3/8" wide side bend specimens,
side-by-side, with a plate fixture using an 0.042" thick saw blade. |
$115.00 |
| BSC-IX.1-1/2.042 |
1-1/2"
ASME
Section IX Plate Template. For cutting (2) 1-1/2" wide face and root bend
specimens, side-by-side, with a plate fixture using an 0.042" thick
saw blade. |
115.00 |
| BSC-AWS.3/8.042 |
3/8"
AWS
Plate Template. For cutting (2) 3/8" wide side bend specimens, spaced at
2" apart, with a plate fixture using an 0.042" thick saw blade. |
115.00 |
| BSC-AWS.1-1/2.042 |
1-1/2"
AWS Plate Template. For cutting (2) 1-1/2" wide face and root bend
specimens, spaced at 2" apart, with a plate fixture using an
0.042" thick saw blade. |
115.00 |
Top of Page
|
|
| Part
No. |
Description |
Price |
| BBC |
Backing
Bar Cutting Fixture. For cutting the excess backing bar material from
plate face, root, or side bend specimens in preparation for final
grinding. This fixture is not mounted on the BSC-IB, but held in the saw
vise. On most saws, the independent BBC Backing Bar Cutting Fixture can be
mounted and used without removing the other fixtures. |
$1845.00 |
Top of Page
| VERTICAL
TILT BAND SAW
|
| Part
No. |
Description |
Price |
| SAW |
Heavy duty, hydraulic saw with
custom adjustable forward and return blade stops. |
$28,615 |
| Option |
Manual Chip Conveyor |
995 |
Top of Page
Effective Date: 06-14-06
|
Pricing - Bend Specimen Cutting System